Industry News
-
Saudi Arabia voluntarily reduces production
On August 4th, domestic Shanghai SC crude oil futures opened at 612.0 yuan/barrel. As of press release, crude oil futures rose 2.86% to 622.9 yuan/barrel, reaching a high of 624.1 yuan/barrel during the session and a low of 612.0 yuan/barrel. In the external market, US crude oil opened at $81.73 ...Read more -
US oil inventory fell more than expected, with oil prices rising by 3%
New York, June 28 (Reuters) – Oil prices rose about 3% on Wednesday as US crude oil inventories exceeded expectations for the second consecutive week, offsetting concerns that further interest rate hikes may slow economic growth and reduce global oil demand. Brent crude oil futures rose $1....Read more -
Technical specifications for the main shaft forging of wind turbine generator
Smelting The main shaft steel should be smelted using electric furnaces, with refining outside the furnace and vacuum degassing. 2.Forging The main shaft should be directly forged from steel ingots. The alignment between the axis of the main shaft and the center line of the ingot should be main...Read more -
Non-magnetic integral blade type stabilizer
The development and production of nonmagnetic hard alloy materials are significant manifestations of new hard alloy materials. Hard alloy is made by sintering the refractory metal carbides of the IV A, V A, and VI A groups in the periodic table of elements (such as tungsten carbide WC), and the t...Read more -
HF-2000 integral or welded blade Stabilizer
HF-2000 Stabilizer is an important tool for the oil drilling industry. Stabilizer is connected with the bottom of a drill bit. And stabilize the drill string and maintain the desired direction of drilling operation. HF-2000 Stabilizer dimension and shape are depending on the specific needs of the...Read more -
Ultrasonic testing of the inner surface of cylindrical forgings
Ultrasonic testing is a commonly used method for detecting internal surface defects in cylindrical forgings. In order to ensure effective testing results, there are some important precautions that need to be followed. Firstly, ultrasonic testing should be performed on cylindrical forgings after ...Read more -
What should be paid attention to when forging large forgings?
What should be paid attention to when forging large forgings? Alloy is a widely used material, and forgings are alloy components produced from alloy forging. In industries such as aerospace, ocean, and shipbuilding, the production of large machinery requires forgings with corresponding specificat...Read more -
Near bit or string HF-3000 stabilizer Introduction
HF-3000 Stabilizer is an important tool for the oil drilling industry. Stabilizer is connected with the bottom of a drill bit. And stabilize the drill string and maintain the desired direction of drilling operation. HF-3000 Stabilizer dimension and shape are depending on the specific needs of the...Read more -
Geothermal formation HF-5000 stabilizer Introduction
HF-5000 Stabilizer is an important tool for the oil drilling industry. Stabilizer is connected with the bottom of a drill bit. And stabilize the drill string and maintain the desired direction of drilling operation. HF-5000 Stabilizer dimension and shape are depending on the specific needs of the...Read more -
How to selection of forging ratio?
As the forging ratio increases, the internal pores are compressed and the as-cast dendrites are broken, resulting in a significant improvement in the longitudinal and transverse mechanical properties of the forging. But when the elongation forging section ratio is greater than 3-4, as the forging...Read more -
What is the difference between rolled and forged shafts?
For shafts, rolling and forging are two common manufacturing methods. These two kinds of rolls differences in production process, material characteristics, mechanical properties, and scope of application. 1. Production process: Rolled shaft: The rolling shaft is formed by continuously pressing a...Read more -
News about China’s Forging Capability
Many important components of some heavy equipment are forged in Chinese hydraulic press forging plants. A steel ingot with a weight of approx. 500 tons was taken out from the heating furnace and transported to a 15,000-ton hydraulic press for forging. This 15,000-ton heavy-duty free forging hydra...Read more
